Allow paste to dwell on-the coatings for 12-48 hours depending upon the number of … Use only Peel Away cover. 5. 9. The dwell time for CitriStrip is between 30 minutes and 24 hours. 6. 8. Check the progress at intervals by removing a small part of paper from the area. Available in packs of 10 x 1 meter sheets for easy convenience. We have been Canada's premiere industrial supplier … 6. Check the progress at intervals by removing a small part of paper from the area. fibreglass, limit dwell time to 2-6 hours). Clean Up: Exterior Clean Up: Before beginning, use Peel Away Paper is a fiber laminated paper that protects passersby from accidental contact and reduces evaporation of the remover. 3. ft. per gallon; results may vary. Leave the surface for 2 hours to 48 hours depending on the number of layers and climate conditions. Find your DUMOND PEEL AWAY PAPER,3 X 3 FT.,10 PER PACK at Grainger Canada, formerly Acklands-Grainger. After the minimum time, you can begin testing a small patch to see if the paint will scrape off. 03/2014 Best Practices: Always test each type of surface and paint coating for efficacy, dwell times and thickness. The paste is then covered with our patented peel away® paper to control evaporation. If paint is starting to come off the wall, remove the paper, if Peel Away hasn’t fully worked yet, seal the area back up and leave. any air bubbles. The dwell time for Smart Strip is between three and 24 hours. Peelaway ® Marine Anti-fouling Remover Product description: Peelaway ® Marine Antifouling Remover is specially formulated to effectively remove multiple layers of anti-foul coatings with one application saving time by reducing the need for repeated scraping.. Its patented water based poultice system means the product remains active and works without rapidly drying out. Sherwin-Williams Smart Strip™ Peel Away Paper Overview Sherwin-Williams Smart Strip™ Peel Away Paper is a patented laminated paper that extends the dwell time for Smart Strip™ PRO Paint Remover. The Peel Away paper enhances and extends dwell time. This product covers approximately 33 square feet. The dwell time for Peel Away 1 is between 12 and 24 hours. On average 72 hours minimum. If paint is starting to come off the wall, remove the paper, if Peel Away hasn’t fully worked yet, seal the area back up and leave. fibreglass, limit dwell time to 2-6 hours). (When using on painted fibreglass, limit dwell time to 2-6 hours). Let the Peel Away® ST-1 Steel Surfaces Remover dwell at least 12 hours before removing. for dwell time determined during patch testing. Removal: Remove by sliding plastic Peel Away® tool or putty/taping knife beneath paper, paste and paint; ease away from surface in one piece. The peel away® 1 system includes an alkaline paste that is spread over the surface to be stripped. 4. By sliding a scraper behind the paper, ease off the paint, paste and paper in one piece. By sliding a scraper behind the paper, ease off the paint, paste and paper in one piece. The Peel Away Paper is a patented laminated paper that extends the dwell time for all Dumond paint removal products. Peel Away®1 provides an average spread rate of approximately 20 sq. Peel AwayNever apply ® ST-1 Steel Surfaces Remover and leave it for 24-48 hours without checking on it Tape up the edges with masking tape for optimal results. Correct dwell time will be determined by performing a Trial patch evaluation prior to full application.